Termorens cleaning liquid 104 for the removal of mussels, rur, calcareous sea organisms, humus, salt and other deposits, as well as removes bacteria in water systems. The product is used in Pipe systems, seawater intakes, sea chests, heat exchangers or immersion vessels. The product is environmentally friendly and has no effect on other products other than specified. After treatment, the system is rinsed until it has returned to its normal pH value.

Før rensFør rens
Før rensFør rens
Før rensFør rens

INSTRUCTIONS FOR USE
The pre-treatment area must be free of oil, grease and the like. Pre-treat with degreaser if necessary.

Instructions for use and dosage
Termorens cleaning liquid 104 is filled into the system with its own pump with high “flow”. Clean is fastest when heated to about 40-60 degrees. You can also clean with a cold mixture.

When liquid is mixed in, it circulates with the plant’s own pumps. Make sure all valves are open so that the liquid is everywhere. If you only want to clean exchangers, simple heating courses, simple radiators, spirals, capacitors or other things without your own circulation, use a circulation pump.

Time for cleaning depends on how much coating there is in the plant and on the consistency of this.

Solid coatings such as lime, marine organisms, etc. are converted into liquid form which is flushed out of the plant after cleaning.

Rinse all liquid from the system with water after cleaning.

Termorens cleaning liquid 104 can be used on all types of gaskets, plastics and metals without damaging them. It does not damage gaskets and liners in the system.

HMS Datasheet Termorens Cleaning Liquid 104
Technical Datasheet Termorens Cleaning Liquid 104