Termorens GEL 202 is developed for more exposed / heavier corrosion, removal of magnetite, oxides (corrosion). The product is environmentally friendly and has no effect on other products other than specified. After treatment, the surfaces are cleaned with water in the usual way.
INSTRUCTIONS FOR USE
The pretreatment surface must be free of oil, grease and the like. Pre-treat with degreaser if necessary.
Method of use
Termorens GEL 202 is lubricated, rolled or sprayed on the surface to be treated. The best results are obtained by applying high-pressure spraying. Be sure to get gel in joints and pores as well to remove all rust. Effect time depends on how much rust the surface has. Normally, gel is sprayed on one day and removed the next day or longer, as needed. If the oxidation consists of a thick coating, it may be necessary to repeat the process several times, or remove rust tubers before a treatment with Termorens GEL 202. Gel is rinsed off with water. You can use a high pressure washer w / steam. The man gets the best and fastest result by using steam and a high-pressure washer with 500 to 800 bar with a high water volume, depending on what is to be removed. This is assessed by our professionals.
Termorens GEL 202 is a liquid GEL that is sprayed as a coating on the surfaces and is therefore well suited under horizontal surfaces and on vertical surfaces. GEL gets access to areas where it is difficult to access, such as around bolts, corners, double-folded plates, in cable trays, under electric cables, etc.