Termorens GEL 203 for the removal of mussels, rur, calcareous sea organisms, humus, salt and other deposits, as well as removes bacteria in water systems. The product is used in, seawater intake, sea chests, propellers, heat exchangers, etc.
The product is environmentally friendly and has no effect on other products other than specified. After treatment, the surfaces are cleaned with water in the usual way.
INSTRUCTIONS FOR USE
The pretreatment surface must be free of oil, grease and the like. Pre-treat with degreaser if necessary.
Method of use
Apply, roll or spray on the surface to be treated. The best results are obtained by applying high-pressure spraying. Effect time depends on the amount of fouling. Normally, gel is sprayed on one day and removed the next day or longer, as needed. This is assessed by our professionals. Gel is rinsed off with water with a high pressure washer 200 bar w / steam, or higher pressure.
GENERALLY
Termorens GEL 203 is a liquid GEL that is sprayed as a coating on the surfaces and is therefore well suited under horizontal surfaces and on vertical surfaces. GEL gets access to areas where there is difficult access, which are around bolts, corners, double folded plates in cable trays, under electric cables, etc.
