INSTRUCTIONS FOR USE
The pretreatment surface must be free of oil, grease and the like. Pre-treat with degreaser if necessary.
Method of use
Apply, roll or spray on the surface to be treated. The best results are obtained by applying high-pressure spraying. Effect time 6 hours. If there is coating in the plant, this must also be removed and normally gel is sprayed on one day and removed the next day, or longer, as needed. This is assessed by our professionals. Gel is rinsed off with water with a high pressure washer 200 bar w / steam.
TermoRens GEL 204 is a liquid GEL that is sprayed as a coating on the surfaces and is therefore well suited under horizontal surfaces and on vertical surfaces. GEL gets access to areas where there is difficult access, which are around bolts, corners, double folded plates, in cable trays, under electrical cables, etc.